| Outdoor Wet AC Withstand Voltage |
35 kV |
35 kV |
Evaluated for 1 min under wet testing conditions |
| Indoor Dry AC Withstand Voltage |
39 kV |
39 kV |
Evaluated for 5 min continuous dry operation |
| Impulse Withstand Voltage (BIL) |
95 kV |
95 kV |
1.2/50 μs standard surge profile, +10 impulses |
| Partial Discharge Threshold |
≤ 10 pC |
≤10 pC |
Screened at 1.73 U0 test potential |
| Molded Cable Breakout Boot |
— |
1 pc |
Environmental multi-leg branching boot |
| Stress Relief Sleeves |
1 pc |
3 pcs |
High-dielectric field-grading control tube |
| Primary Insulation Sleeves |
1 pc |
3 pcs |
Heavy-wall cross-linked polymeric protective sleeve |
| External Sealing Tubes |
1 pc |
3 pcs |
Moisture-proof outer containment tubing |
| Single-Core Rain Sheds |
2 pcs |
6 pcs |
Anti-tracking creepage skirts (outdoor installations only) |
| 3-Core Trifurcating Rain Shed |
— |
1 pc |
Neck rain shield (outdoor installations only) |
| Core Identification Sleeves |
— |
3 pcs |
Phase marking color-coded tubes |
| Sealant & Void-Filling Mastic |
1 bag |
1 bag |
Hydrophobic stress-grading filling compound |
| Braided Copper Ground Wire |
1 pc |
1 pc |
Flexible solderless earthing connection |
| Constant-Pressure Clamping Springs |
1 pc |
2 pcs |
Mechanical roll springs for secure braid retention |
| Dielectric Lubricant Grease |
1 bag |
1 bag |
Interface silicone compound for void elimination |
| Cable Stripping Knife |
1 pc |
1 pc |
Insulation and outer sheath trimming tool |
| Abrasive Preparation Strips |
2 pcs |
3 pcs |
Non-conductive sanding paper for surface abrasion |
| Installer Safety Gloves |
2 pairs |
2 pairs |
Clean handling protective gloves |
| Solvent Surface Cleaning Wipes |
2 pkts |
3 pkts |
Fast-drying, residue-free degreasing towels |
| Conductor Alignment Wedge |
— |
1 pc |
Phase separation and positioning cone |
| Step-by-Step User Manual |
1 pc |
1 pc |
Detailed field assembly guide |
