Grounding system may also be established by means of angle iron grounding electrodes. Angle iron is a v-sectioned steel which is used as fitting material generally in steel constructions. Electrode to be used in grounding should be made pure copper or galvanize coated steel. Galvanized steel grounding electrode is coated with zinc by means of hot dip galvanizing technique and galvanizing thickness is min. 70 micron.
Grounding electrodes should be made from corrosion-resistant material (resistant against chemical and biologic effects, oxidation, corrosion formation, electrolyze etc.) since it is contacted with soil continuously. In short, the most important point in electrodes is corrosion-resistance. In order increase this resistance, coating have been made in certain intervals specified by TS 914 EN ISO 1461 standard in our plants. Angle grounding electrodes have been produced in length of 1m, 1.5m and 2m and wall thickness of 4 to 7mm which are generally used.
Earthing Electrodes / Earthing Rods / Earthing Pales.
| Product Code | Dimension A × A × T |
Length H |
Weight |
|---|---|---|---|
| TK.007 | 60x60x4 | 1000 | 3.7 |
| TK.008 | 60x60x4 | 1500 | 5.7 |
| TK.009 | 60x60x4 | 2000 | 7.5 |
| TK.010 | 60x60x5 | 1000 | 4.6 |
| TK.011 | 60x60x5 | 1500 | 6.9 |
| TK.012 | 60x60x5 | 2000 | 9.1 |
| TK.013 | 60x60x6 | 1000 | 5.4 |
| TK.014 | 60x60x6 | 1500 | 8.1 |
| TK.015 | 60x60x6 | 2000 | 11 |
| TK.016 | 65x65x5 | 1000 | 4.9 |
| TK.017 | 65x65x5 | 1500 | 7.5 |
| TK.018 | 65x65x5 | 2000 | 10 |
| TK.019 | 65x65x6 | 1000 | 6.2 |
| TK.020 | 65x65x6 | 1500 | 9 |
| TK.021 | 65x65x6 | 2000 | 12 |
| TK.022 | 65x65x7 | 1000 | 7 |
| TK.023 | 65x65x7 | 1500 | 10.5 |
| TK.024 | 65x65x7 | 2000 | 14 |
Integrated engineering, procurement, construction, and commissioning solutions for power infrastructure, renewable energy, substations, and water projects across regional and international markets.
Copyright © 2026 Mustakbeli all rights reserved. Made by Onur Freelance.
